November 9, 2026
Double Drone Flute, Drone Flute, Double Flute: What the Names Mean

The Key of A flute in the shop right now goes by three names. Its product page calls it a Native American Style Drone Flute. A line further down the same page says it is a double drone flute. Its sound demo on YouTube is titled "Key of A Double Drone Padauk and Maple Flute 432Hz". All three are right, and they all describe one instrument.
So if you searched for a double drone flute, a double flute or a drone flute, you were looking for the same thing: a Native American style flute with two chambers, played with one breath. One chamber carries the melody and has the finger holes. The other holds a single steady note underneath for as long as you keep breathing into the flute. You finger the melody side as you would any single flute, with nothing extra to finger for the drone, though the flute takes a little more breath.
Why one flute has several names
Each name points at a different part of the instrument. "Drone" is the steady note, and drone flute is the name most people use. "Double" counts the chambers. Double drone flute puts the two ideas together, and it is the name on the sound demos at the top of my Watch page. Further down the page, other videos say "Native American Inspired 7 hole Extended Scale DRONE FLUTE" instead. Same kind of flute, different title.
The "Native American style" part of the name matters as much. My flutes are inspired by the Native American flute, with a drone chamber added. Multi-chambered flutes turn up in many cultures, the clay double flutes of Mesoamerica among them, and the wooden drone flute is a modern relative of those.


Harmony flute, triple flute, single flute
You will also see "harmony flute". Some makers and sellers use it for two-chamber flutes; I don't use it on this site. Designs differ under every one of these names, too. Some makers give the drone side holes or plugs so the player can choose its note, and on others it sounds one steady pitch. When a listing doesn't say which design you're looking at, ask the maker before you buy.
A triple flute has three chambers. On mine the third adds more sustained sound beneath the melody, and at the moment I build them to order. A single-chamber flute is the plain Native American style flute: one chamber, one voice, a wide expressive range.
Reading the rest of a flute's name
Take the other drone flute in this post, the Key of Low D in Peruvian walnut and ovangkol. Its full title carries four more pieces of information:
- 7 Hole: the usual six finger holes plus a thumb hole on the back. Keep the thumb hole covered and you are playing a six-hole flute; open it for one more note above the scale. The product text calls this a 7 hole extended scale flute.
- Key of Low D: the flute's key. Lower keys are bigger and cost more. This Low D is 27 1/2 inches long with a 1 inch bore, where the Key of A is 20 1/2 inches with a 7/8 inch bore.
- Peruvian walnut and ovangkol: the body wood and the accent wood.
- 432Hz: the tuning. I build at 440Hz, the standard concert pitch, or at 432Hz on request, and what that choice changes has its own post.
Two double drone flutes to hear
Both of these are in stock and ready to ship this week from Spain. Seven inches of length separate them. Play the two demos back to back and judge the difference a key makes for yourself.
Every two-chamber flute I have, in stock or built to order, is on the double drone flutes page. For how the drone feels under your fingers, there is What Is a Drone Flute?, and Start Here covers choosing a key, a wood and a tuning.
Curious about a flute of your own?